About this role
Job Title: Test Engineer Embedded Medical Device Verification Job Description This role focuses on system and integration testing of the firmware that controls a powered surgical staplers control module, which uses three STM32 processors (Main, Safety, and Log) sharing a CAN bus and driving two motors. You will execute detailed test protocols for IEC Class C software, first as dry runs and then as formal test executions in a regulated environment. The position offers hands-on work with embedded systems and test equipment, contributing directly to the safety, reliability, and performance of a high-impact medical device. Responsibilities
- Execute system and integration test protocols for the powered surgical stapler control module, including dry runs and formal test executions.
- Operate and verify the behavior of three STM32-based processors (Main, Safety, and Log) that share a CAN bus and control two motors.
- Perform hands-on embedded bench testing using oscilloscopes with current and logic probes, digital multimeters, programmable power supplies, force fixtures, and load cells.
- Measure and analyze timing, current, and other electrical parameters to verify firmware and hardware interactions.
- Debug CAN bus and serial communications by building and sending frames with tools such as PCAN-View, and by reading time-stamped CAN captures and UART debug logs.
- Follow formal testing protocols in a regulated environment, adhering to ISO and FDA QMSR, IEC, and related standards.
- Document all test activities using good documentation practices, capturing objective evidence, and maintaining complete and accurate records.
- Identify, document, and track deviations and defects discovered during testing, using tools such as JIRA for defect reporting and management.
- Investigate test failures by reading and interpreting embedded C code to understand firmware behavior, without modifying or developing firmware.
- Use Python scripting to support test tooling and log analysis, including scheduling CAN messages and parsing captured data.
- Collaborate with engineering and quality teams to clarify requirements, refine test protocols, and support root cause analysis for observed issues.
- Contribute to the preparation of test results and evidence that may support regulatory submissions.
- Work on-site during first shift, operating within an engineering lab environment and following established procedures and safety practices.
Essential Skills
- Hands-on embedded bench testing experience using oscilloscopes with current and logic probes, including timing measurements.
- Proficiency with digital multimeters, programmable power supplies, force fixtures, and load cells.
- Experience with CAN bus and serial debugging, including building and sending frames using tools such as PCAN-View.
- Ability to read and interpret time-stamped CAN captures and UART debug logs.
- Experience executing formal test protocols in a regulated environment governed by ISO, FDA QMSR, and IEC standards.
- Strong good documentation practice, including capturing objective evidence, handling deviations, and reporting defects.
- Ability to read embedded C code well enough to follow firmware behavior during failure investigations.
- Python scripting skills for test tooling and log analysis, such as scheduling CAN messages or parsing captured logs.
- Familiarity with FDA testing protocols and their role in regulated product development.
- Experience using JIRA for defect tracking and issue management.
- Bachelors degree in electrical, computer, or biomedical engineering, or equivalent experience.
Additional Skills & Qualifications
- Experience executing test protocols whose results supported FDA submissions such as 510(k), De Novo, or PMA.
- Hands-on experience with STM32 or other ARM Cortex-M microcontrollers, including programming them with a debug probe.
- Experience using high-speed cameras to measure display or indicator response, synchronized with oscilloscope measurements.
- Exposure to safety- and mission-critical products in domains such as medical devices, aerospace, defense, automotive, energy, or manufacturing.
- Interest in working across hardware, software, testing, verification, validation, and regulated product development.
- Desire to contribute in a small-team environment with high visibility and ownership of project outcomes.
Work Environment This is an on-site, first-shift position in an engineering lab environment. You will work directly with embedded systems, test equipment, and hardware, including oscilloscopes, digital multimeters, programmable power supplies, force fixtures, load cells, CAN tools, and debug probes. The work centers on safety- and mission-critical products governed by FDA, IEC, and other industry standards, providing strong exposure to regulated engineering practices. The setting emphasizes hands-on engineering, close collaboration with a small technical team, and broad involvement in verification and validation activities. The organization is a growing local engineering group with a focus on meaningful projects where safety, reliability, and performance have real-world consequences, and it supports community initiatives aimed at fighting hunger and helping children.
Job Type & Location
This is a Contract to Hire position based out of East Hartford, CT.
Pay and Benefits
The pay range for this position is $40.00 - $60.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job
classification and length of employment. Benefits are subject to change and may be
subject to specific elections, plan, or program terms. If eligible, the benefits
available for this temporary role may include the following:
Medical, dental & vision
Critical Illness, Accident, and Hospital
401(k) Retirement Plan Pre-tax and Roth post-tax contributions available
Life Insurance (Voluntary Life & AD&D for the employee and dependents)
Short and long-term disability
Health Spending Account (HSA)
Transportation benefits
Employee Assistance Program
Time Off/Leave (PTO, Vacation or Sick Leave)
Job Type & Location
This is a Contract to Hire position based out of East Hartford, CT.
Application Deadline
This position is anticipated to close on Nov 30, 2026.
Workplace Type
This is a fully onsite position in East Hartford,CT. About Actalent
Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 20,000 consultants and 5,000 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing® winner for both client and talent service.
The company is an equal opportunity employer and will consider all applications without
regard to race, sex, age, color, religion, national origin, veteran status, disability,
sexual orientation, gender identity, genetic information or any characteristic protected
by law.
If you would like to request a reasonable accommodation, such as the modification or
adjustment of the job application process or interviewing process due to a disability,
please email [email protected] for other accommodation options.
San Francisco Fair Chance Ordinance:
Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the
city and county of San Francisco, we will consider for employment qualified applicants
with arrest and conviction records.
Massachusetts Lie Detector:
It is unlawful in Massachusetts to require or administer a lie detector test as a
condition of employment or continued employment. An employer who violates this law
shall be subject to criminal penalties and civil liability.
Use of Artificial Intelligence (AI):
We may use Artificial Intelligence (AI) to support parts of our hiring process,
including sourcing, screening, and evaluating candidates. AI helps assess applications
and qualifications, but final decisions are made by our hiring team. By applying, you
acknowledge and agree that your application may be reviewed using AI tools.