About this role
Position Summary
The Commercial Vehicle Paint & Body Technician is responsible for preparing, repairing, and painting commercial truck bodies, installed equipment, and related components to meet company quality standards and customer specifications.
This position performs surface preparation, body repairs, priming, painting, and finishing work on new truck body installations, existing commercial vehicles, and repaired equipment. Responsibilities include matching truck body paint colors to the vehicle cab when required, ensuring a consistent and professional finished appearance.
In addition to painting and body repair responsibilities, the technician helps maintain the paint department's equipment and supplies, monitors preventative maintenance needs, and accurately records paint and coating material usage through the company's paint mixing system to support environmental reporting and regulatory compliance.
The technician may also remove and reinstall truck body components and equipment as part of repair and refinishing work and provide labor and material estimates to support customer quotations.
The successful candidate will demonstrate strong technical skills, attention to detail, safe work practices, and a commitment to productivity, quality, and continuous improvement.
Key Responsibilities
Paint Preparation & Application
- Prepare commercial truck bodies, equipment, and vehicle components for painting.
- Perform surface preparation activities including cleaning, degreasing, sanding, grinding, masking, and other required preparation.
- Remove rust, corrosion, damaged coatings, and surface imperfections as needed.
- Apply appropriate primers, sealers, basecoats, topcoats, and protective coatings according to manufacturer specifications.
- Operate spray equipment and paint booth systems to achieve consistent coverage and finish quality.
- Mix paint products using approved formulas, mixing equipment, and manufacturer instructions.
- Perform paint work on new truck body installations, replacement components, and repaired equipment.
- Ensure appropriate coating thickness, adhesion, coverage, and finish quality.
- Follow proper flash times, curing procedures, and environmental conditions for coating applications.
- Inspect completed paint work and correct defects such as runs, sags, orange peel, overspray, contamination, or inadequate coverage.
- Maintain a clean and organized paint preparation and application area.
Commercial Vehicle Body Repair
- Inspect truck bodies and related equipment to identify surface damage, corrosion, dents, and other repair needs.
- Perform body preparation and repair work on commercial truck bodies and installed equipment.
- Repair minor dents, scratches, surface damage, and cosmetic defects.
- Perform sanding, filling, smoothing, and refinishing of repaired surfaces.
- Prepare repaired areas for primer and paint application.
- Assist with replacement or repair of damaged body panels and related components within the technician's qualifications.
- Remove, repair, replace, and reinstall truck body components, accessories, and installed equipment as needed to complete assigned work.
- Coordinate with Production or Service personnel when repairs require additional fabrication, welding, or mechanical work.
- Ensure repaired surfaces meet company workmanship and appearance standards before painting.
Color Matching & Finish Quality
- Match truck body paint colors to vehicle cab colors when required by customer specifications.
- Use manufacturer paint codes, mixing formulas, color samples, and available color-matching equipment to achieve accurate results.
- Perform spray-out tests or other color verification methods when necessary.
- Adjust paint formulas as appropriate to achieve acceptable color matching.
- Ensure consistent color, gloss, texture, and finish across painted surfaces.
- Inspect completed work under appropriate lighting conditions to identify color or finish inconsistencies.
- Minimize unnecessary paint consumption and rework associated with color matching.
Paint Mixing System & Material Usage Tracking
- Accurately record paint and coating material usage through the company's designated paint mixing and tracking system.
- Ensure paint mixing transactions are properly associated with the applicable job or work order when required.
- Record material quantities used, including applicable primers, coatings, reducers, hardeners, and other tracked products.
- Maintain accurate records of paint mixing, consumption, and material waste as required by company procedures.
- Follow established procedures for tracking coating products to support environmental compliance and reporting requirements.
- Identify and report discrepancies between actual material usage and recorded quantities.
- Ensure paint products are mixed and dispensed using approved equipment and procedures.
- Assist management with paint usage reporting, inventory reviews, and environmental compliance documentation.
- Identify opportunities to reduce paint waste, excessive mixing, and unnecessary material consumption.
Paint Equipment Maintenance & Consumable Monitoring
- Monitor the condition and performance of paint department equipment, including spray guns, paint booths, air filtration systems, compressors, mixing equipment, and related tools.
- Perform routine cleaning and operator-level preventative maintenance on paint equipment according to established procedures.
- Track equipment maintenance intervals and notify management when scheduled maintenance is approaching or due.
- Monitor paint booth filters, ventilation components, and other replaceable items for condition and replacement needs.
- Notify management when paint booth filters, spray gun components, respirator supplies, or other consumable items require replacement.
- Monitor inventory levels of commonly used paint department materials, including:
Paints, primers, hardeners, and reducers
- Sandpaper, abrasives, and grinding supplies
- Masking tape, paper, and plastic
- Spray gun filters, tips, and related components
- Paint booth intake and exhaust filters
- Cleaning solvents and supplies
- Required PPE and respiratory protection supplies
- Communicate anticipated material shortages to management or Purchasing before they disrupt production.
- Report equipment malfunctions, unusual operating conditions, or safety concerns promptly.
- Assist with maintaining equipment maintenance logs and inspection records as required.
Repair Estimates & Quoting Support
- Evaluate commercial truck bodies, upfit equipment, and related components to identify repair requirements and anticipated work scope.
- Provide estimated labor hours and material requirements to management or Sales/Service personnel for preparation of customer quotations.
- Identify replacement parts, paint materials, consumables, and other supplies required for proposed repairs.
- Assist with determining whether components should be repaired or replaced based on condition, repair feasibility, and customer requirements.
- Communicate additional damage, unforeseen repair requirements, or changes in scope discovered during disassembly or repair.
- Support accurate quoting by providing clear descriptions of required work, anticipated labor, and material needs.
- Coordinate with management before performing work outside the approved repair scope.
Safety & Environmental Compliance
- Follow all company safety policies and applicable OSHA, EPA, and state environmental requirements.
- Properly use required personal protective equipment, including respiratory protection, eye protection, gloves, and protective clothing.
- Follow company respiratory protection program requirements, including applicable medical evaluations, fit testing, and training.
- Safely handle, store, mix, and dispose of paints, solvents, coatings, and other chemical products.
- Follow applicable Safety Data Sheet (SDS) instructions and manufacturer safety recommendations.
- Use approved spray equipment, ventilation systems, and paint booth procedures.
- Follow applicable requirements for spray coating operations, including relevant air emissions, hazardous waste, and environmental recordkeeping procedures.
- Properly segregate and dispose of paint waste, used solvents, contaminated materials, and other regulated waste.
- Immediately report spills, unsafe conditions, equipment concerns, or potential compliance issues.
- Maintain accurate paint usage records to support company environmental reporting and compliance obligations.
- Participate in required safety and environmental training.
Production Support & Quality
- Review work orders and production instructions to understand paint and body repair requirements.
- Coordinate with Production and Operations personnel to prioritize work according to scheduled vehicle completion dates.
- Complete assigned work efficiently while maintaining required quality standards.
- Inspect work throughout the preparation and painting process to identify potential defects before final completion.
- Minimize rework through proper preparation, application techniques, and process control.
- Communicate concerns regarding material availability, equipment performance, or production delays.
- Assist with identifying opportunities to improve paint department productivity and workflow.
- Maintain accurate labor and job documentation as required.
- Support final quality inspections and promptly correct identified deficiencies.
Participate in 5S, workplace organization, and continuous improvement activities.
Qualifications
Qualifications
Education & Experience
- High school diploma or GED preferred.
- Previous experience in automotive, commercial vehicle, industrial, or equipment painting strongly preferred.
- Experience with commercial truck body preparation and repair preferred.
- Experience using automotive or industrial paint mixing systems preferred.
- Technical training in automotive refinishing, collision repair, or industrial coatings is a plus.
- Experience with paint booth equipment and spray application systems preferred.
Technical Skills & Knowledge
- Knowledge of paint preparation, priming, application, and finishing techniques.
- Ability to perform minor body repairs and surface refinishing.
- Familiarity with commercial truck bodies, installed equipment, and related components.
- Ability to safely remove and reinstall truck body components and accessories using appropriate hand and power tools.
- Ability to estimate labor time, replacement parts, and material requirements for common body and equipment repairs.
- Ability to match paint colors using manufacturer formulas and mixing systems.
- Understanding of spray equipment operation, cleaning, and maintenance.
- Ability to recognize common paint defects and determine appropriate corrective actions.
- Basic computer skills and ability to accurately enter material usage into paint mixing and tracking software.
- Familiarity with paint department safety requirements and chemical handling procedures.
- Ability to read and follow work orders, product instructions, and technical documentation.
- Strong attention to detail and commitment to quality workmanship.
Personal Tools & Equipment Requirements
- Must provide and maintain a personal toolbox and an appropriate set of hand tools necessary to perform routine truck body component removal, installation, and repair work.
- Maintain personal tools in safe, serviceable condition and keep them organized and secured.
- Use appropriate tools and equipment for assigned tasks in accordance with company safety procedures.
- Company-provided specialty tools, paint equipment, and other designated equipment will be used as required for specific operations.
Professional Skills & Abilities
- Strong organizational and time management skills.
- Ability to work independently and as part of a production team.
- Ability to follow established processes and maintain accurate records.
- Willingness to communicate equipment maintenance needs and material shortages proactively.
- Strong problem-solving skills and mechanical aptitude.
- Ability to manage multiple work assignments and changing production priorities.
- Commitment to safe work practices, productivity, quality, and continuous improvement.
---
Key Performance Indicators (KPIs)
Performance in this position may be evaluated using the following measures:
Paint & Body Quality
- First-pass paint quality and reduction in rework
- Quality and consistency of paint finishes
- Accuracy of color matching
- Completion of repairs to company workmanship standards
Productivity
- Jobs completed versus scheduled requirements
- Actual labor hours compared with estimated or standard hours
- Timely completion of assigned paint and body work
- Reduction in delays caused by preparation or paint process issues
Material Management & Compliance
- Accuracy and completeness of paint mixing system records
- Paint and coating material consumption
- Reduction in unnecessary material waste
- Timely reporting of low inventory and consumable replacement needs
- Completion of required environmental and safety documentation
Equipment Maintenance
- Timely identification of equipment maintenance needs
- Proper cleaning and care of paint equipment
- Timely notification of filter replacement requirements
- Reduction in preventable equipment downtime
Repair & Quoting Support
- Accuracy and completeness of labor and material estimates
- Timely communication of additional repair requirements
- Proper documentation of replacement parts and repair scope
---
Physical Requirements
- Ability to stand, walk, bend, kneel, reach, and perform repetitive movements throughout the workday.
- Ability to work around and access commercial truck bodies and equipment.
- Ability to lift and carry up to 50 pounds, with appropriate assistance or equipment for heavier items.
- Ability to perform sanding, masking, painting, and related activities for extended periods.
- Ability to distinguish colors and evaluate finish quality, with corrective lenses if needed.
- Ability to use required PPE and respiratory protection in accordance with applicable safety requirements.
Work Environment
This position works primarily in a commercial vehicle production and paint facility. The employee may be exposed to paint fumes, dust, noise, moving equipment, chemicals, and varying temperatures.
Work is performed in designated paint booths, preparation areas, and production spaces using required ventilation, protective equipment, and established safety procedures.
---
Position Expectations
The Commercial Vehicle Paint & Body Technician is expected to consistently deliver high-quality paint and body work while supporting the efficient, safe, and compliant operation of the paint department.
The position has five primary objectives:
- Quality Workmanship: Produce professional paint finishes and body repairs that meet customer expectations and company standards.
- Production Efficiency: Complete work accurately and efficiently to support vehicle delivery schedules.
- Equipment & Material Readiness: Proactively monitor equipment maintenance, filter conditions, and consumable inventory to prevent unnecessary downtime.
- Regulatory Compliance: Maintain accurate paint usage records through the mixing system and follow all applicable safety, environmental, and waste management procedures.
- Repair & Quoting Support: Perform necessary component removal and installation work and provide accurate labor and material estimates to support customer repair quotations.
The overall goal is to ensure commercial vehicles leave the paint department with a durable, professional finish while minimizing rework, controlling material costs, and supporting company safety and environmental compliance requirements.