About this role
JOB DESCRIPTION – KOTA STONE / FLOOR POLISHING WORKER
1. JOB INFORMATION
Job Title: Kota Stone / Floor Polishing Worker
Department: Maintenance / Civil Maintenance
Job Category: Skilled Worker
Reporting To: Maintenance Supervisor / Civil Supervisor
Work Location: Company Premises
2. JOB SUMMARY
A Kota Stone / Floor Polishing Worker is responsible for carrying out floor installation, surface preparation, grinding, polishing, finishing and maintenance activities involving Kota stone and other types of flooring materials. The main purpose of this position is to ensure that floors and stone surfaces are properly installed, levelled, polished and maintained according to the required quality standards.
The employee should have practical knowledge of Kota stone, marble, granite and other flooring materials, along with the tools and equipment used for cutting, grinding, levelling and polishing work. The role involves preparing floor surfaces, checking measurements, fixing stone pieces, filling joints, removing uneven surfaces and applying suitable polishing materials to achieve a smooth and clean finish.
The worker is also responsible for repairing damaged flooring, removing stains, maintaining floor surfaces and carrying out regular polishing activities wherever required. Proper attention should be given to the finishing, alignment and durability of the flooring work.
The employee must follow instructions provided by the supervisor, use materials and equipment responsibly, maintain workplace cleanliness and complete assigned activities within the given timeline. Safety precautions must be followed during cutting, grinding, polishing and other floor maintenance activities.
3. MAIN DUTIES AND RESPONSIBILITIES
3.1 Surface Preparation
The worker is responsible for preparing floor surfaces before starting Kota stone installation or polishing activities. The work includes removing dust, dirt, cement residues, old flooring materials and other unwanted substances from the surface. The employee must check the floor condition and ensure that the base is suitable for carrying out installation or polishing work. Uneven surfaces should be identified and corrected through appropriate levelling methods. Proper surface preparation is important to achieve good finishing and long-lasting flooring.
3.2 Kota Stone Installation and Fitting
The worker must carry out Kota stone laying and fitting activities according to the required measurements and site conditions. The employee should measure and mark the floor area before cutting and placing stone pieces. Kota stones must be properly aligned and positioned to maintain uniformity throughout the floor. Cement mortar or other suitable fixing materials should be used as instructed. Proper spacing and joint alignment must be maintained during installation. The worker should check the level of the flooring regularly to ensure that the finished surface is even and properly fitted.
3.3 Stone Cutting and Shaping
The employee is responsible for cutting and shaping Kota stone and other flooring materials according to the required dimensions. Suitable cutting machines and tools should be used to achieve accurate sizes and clean edges. Measurements must be checked before cutting to avoid material wastage. The worker should carefully handle stone pieces during cutting, shifting and installation activities. Proper precautions must be taken while operating cutting equipment and handling heavy stone materials.
3.4 Floor Grinding and Levelling
The worker must perform grinding and levelling activities to remove uneven surfaces and improve the overall condition of the flooring. Grinding machines and suitable abrasives should be used according to the type and condition of the stone. The employee should ensure that joints, edges and uneven areas are properly levelled. Grinding work must be carried out carefully to avoid damaging the stone surface. The floor should be inspected after grinding to ensure that it is ready for the polishing process.
3.5 Floor Polishing Activities
The worker is responsible for carrying out polishing activities on Kota stone and other flooring surfaces to achieve a smooth and uniform finish. The employee should use suitable polishing machines, pads, abrasives and polishing materials according to the type of stone. Polishing should be performed in stages wherever required to improve the appearance and shine of the floor. The worker must ensure that the entire surface receives uniform treatment without leaving visible patches, scratches or uneven marks. Completed polishing work should be checked to ensure that it meets the required finishing standards.
3.6 Joint Filling and Finishing Work
The worker must carry out joint filling and finishing activities after the installation of Kota stone flooring. Gaps between stone pieces should be filled using suitable filling materials as instructed by the supervisor. Excess material should be removed carefully to maintain a clean appearance. The employee must ensure that joints are properly filled and finished to prevent dust accumulation and maintain the durability of the flooring. Final finishing should be completed after the filling material has properly set.
3.7 Repair and Maintenance Work
The employee is responsible for repairing damaged, cracked, loose or uneven Kota stone flooring within the assigned working area. Damaged stone pieces should be identified and replaced wherever necessary. The worker must carry out minor repairs, surface correction, grinding and repolishing activities to restore the condition of the floor. Stains, scratches and other surface defects should be treated using suitable methods. Any major flooring damage or additional repair requirement must be reported to the concerned supervisor.
3.8 Handling of Tools and Equipment
The worker must properly handle and maintain all tools and equipment used for stone installation, grinding and polishing activities. The equipment may include grinding machines, polishing machines, stone cutters, measuring tapes, levels, trowels and other related tools. Machines should be checked before starting work to ensure that they are in proper working condition. Equipment must be cleaned after use and stored in designated locations. Any damaged or faulty machine or tool should be reported to the supervisor immediately.
3.9 Handling of Materials
The employee must handle Kota stone, cement, sand, polishing compounds, adhesives, abrasives and other flooring materials carefully. Materials should be selected according to the requirements of the assigned job. Proper measurements and material quantities should be maintained to avoid unnecessary wastage. Stone pieces must be stored safely to prevent breakage and damage. The worker should inform the supervisor whenever additional materials or equipment are required for completing the assigned work.
3.10 Safety and Precautionary Measures
The worker must follow all workplace safety rules while performing stone cutting, grinding and polishing activities. Appropriate personal protective equipment, including safety shoes, gloves, safety goggles, face masks, helmets and ear protection, should be used wherever required. Necessary precautions must be taken while operating electrical machines and handling heavy stone pieces. Wet floors and working areas should be properly managed to prevent slipping accidents. The employee must ensure that electrical connections and equipment are handled safely. Any accident, injury or unsafe working condition should be reported to the supervisor immediately.
3.11 Housekeeping and Workplace Cleanliness
The worker is responsible for maintaining cleanliness in the assigned working area before, during and after completing the job. Stone dust, cement waste, polishing residues and other unwanted materials should be removed properly. Water spills and slurry should be cleaned to prevent slipping and workplace accidents. Tools, machines and materials must be kept in their designated places. The employee should ensure that the completed flooring area is clean and ready for use after finishing the assigned work.
3.12 Coordination and Teamwork
The worker should coordinate with the maintenance supervisor, civil maintenance team and other employees regarding daily work assignments. The employee may be required to work with masons, helpers, maintenance technicians and other skilled workers during flooring installation and repair activities. Instructions should be understood clearly before starting any job. The worker must communicate material requirements, technical difficulties and work progress to the supervisor. Proper teamwork and coordination are necessary to complete flooring work efficiently.
3.13 Work Planning and Reporting
The employee must follow the daily work schedule and instructions provided by the supervisor. Assigned installation, grinding, polishing and repair activities should be completed within the given timeline. The worker should inspect the finished surface and report any defects that require correction. Completed jobs, pending work, material shortages and equipment-related problems must be communicated to the concerned supervisor. Work progress should be reported whenever required by the department.
4. EDUCATIONAL QUALIFICATION
The minimum educational qualification preferred for this position is 8th or 10th standard. Candidates having ITI or vocational training in civil maintenance, masonry, stone work or a related trade may be preferred. Practical knowledge of Kota stone installation, floor grinding and polishing is desirable. Candidates with relevant technical training and practical experience may also be considered according to company requirements.
5. WORK EXPERIENCE
Previous experience in Kota stone laying, marble work, granite fitting, floor grinding, stone polishing or civil maintenance activities will be preferred. The candidate should have practical knowledge of stone cutting, surface preparation, floor levelling, joint filling and polishing techniques. Experience in handling grinding machines, polishing equipment and other flooring tools will be an added advantage.
6. REQUIRED SKILLS AND COMPETENCIES
The employee should possess practical knowledge of Kota stone installation and floor polishing activities. The ability to take accurate measurements, prepare surfaces and operate grinding and polishing machines is important. The candidate should have knowledge of different flooring materials, polishing compounds and finishing techniques. Good attention to detail is required to maintain uniformity and quality in flooring work. The employee should also possess basic problem-solving skills, knowledge of workplace safety, proper material-handling practices and the ability to follow instructions. Teamwork, time management and responsible work behaviour are equally important.
7. WORKING CONDITIONS
The employee will mainly work within the company’s premises, including production areas, maintenance sections, corridors, workshops and other assigned locations. The job may involve standing for long periods, bending, kneeling, lifting and shifting heavy stone pieces and working with grinding and polishing machines. The employee may also be exposed to stone dust, water, cement and polishing materials during daily activities. Proper protective equipment must be used, and all safety instructions must be followed while performing assigned work.
8. PERFORMANCE STANDARDS AND EXPECTATIONS
The worker is expected to complete all assigned flooring and polishing activities with proper finishing and quality. Accurate measurements, correct stone alignment, smooth surfaces, properly filled joints and uniform polishing are important performance requirements. The employee should complete work within the given timeline while avoiding unnecessary material wastage and damage to company property. Proper maintenance of tools and equipment, workplace cleanliness, safety compliance and teamwork are also expected. Performance may be evaluated based on work quality, finishing standards, task completion, material utilisation, safety compliance, attendance and discipline.
9. GENERAL RESPONSIBILITIES
Apart from the responsibilities mentioned above, the worker may be required to perform other related activities assigned by the Maintenance Supervisor or Civil Supervisor from time to time. The employee should remain flexible regarding maintenance requirements and provide support during flooring installation, renovation, repair and improvement activities. All duties must be performed according to company policies, departmental instructions, workplace safety standards and operational requirements.
10. OVERALL JOB PURPOSE
The overall purpose of the Kota Stone / Floor Polishing Worker position is to ensure that stone flooring installation, grinding, polishing, finishing and maintenance activities are carried out properly, safely and efficiently.
The employee plays an important role in maintaining the appearance, smoothness, cleanliness and durability of floors within the company premises. Through proper installation techniques, accurate measurements, quality polishing and regular maintenance, the worker contributes to maintaining a clean, safe and well-maintained workplace.
Environment and Health & safety
To ensure processes needed for an integrated management system for establishing, implementing and maintaining properly in the department.
To participate in various awareness training on environment, health and safety.
To participate in management review meetings and maintain records of the same.